Divisions > Safety & Security Kwick Automatic Deploying Bollards Stainless Steel Outer Skin with Rust Treated Inner Carbon Steel Frame…!!! General Specifications: Pneumatic operating system. System will provide 60 full cycle operations incase of total electrical power failure from residual air in the compressors. Diameter of Bollard is 28cm. Wall thickness of the bollard is 21.5mm. The pit depth required for installation will be 2.3 meter in concrete construction. Includes 8 bar pneumatic air driven system. This Bollard has Long Life Expectancy Components.   Above Ground Height 1,200 mm   Extension Range 600 -1,200 mm   Inner Diameter 279 mm   Outer Diameter 324 mm   Fixed Part Total Thickness 21.5mm   Fixed Part Stainless Steel Thickness 4 mm   Fixed Part Steel Thickness 17.5mm   Extension Part Total Thickness 17.25 mm   Extension Part Stainless Steel Thickness 3 mm   Extension Steel Thickness 14.25 mm   Impact Resistance 7,500 Kgs   Impact Speed 80 Km/hr   Deployment Speed 1-2 Seconds   Life Expectancy 3,000,000 Cycles Top   Analog Cameras & DVR Access Control Advanced Transportation System Automatic Deploying Bollards Biometric Access Control Blast Neutralizing Blanket Bomb Blast Neutralizer Document Scanner Dome Camera & DVR Explosive Autonomous Intelligent Monitoring Surveillance IP Camera & NVR License Plate Recogniser Metal Detector Millimeter Wave Imaging Systems Mobile Jammers Patrol Monitoring Surveillance Perimeter Protection Radio Frequency Identification Rubber Speed Bumps Tyre Killer Under Vehicle Scanning Vehicle Tracking Wi MAX Solutions X-Ray Scanning Machines X-Test Terms of Use | Privacy Statement | Site Map Copyright ©2008 Kwick Soft Solutions Pvt. Ltd.