 |
|
|
|
|
Divisions > Safety & Security
Kwick Metal Detector
- Audio alarm and a strip of position detection indicator LED lights to detect
where the metal is located.
- The Coils on both sides of the archway improve traffic flow by helping to
locate targets on the left, right or at the center of the body.
Dual alarm lights enhance detection by indicating the side on which a
target is located.
- Microprocessor-based circuitry enables the operator to calibrate the
detector to meet the needs of various security applications.
- It has adjustable high sensitivity Multi zone option to identify metal
location, with control board on top, and no external connections.
- The CD, TAPES, FILMS are safe, in this low radiation metal detector.
There are a number of programs with password control.
- There is an electromagnetic cross over rays operation, capable of detecting
the smallest metals with no weak spots. It also has the capability for the connection to PC.
- Our Walk-Through Detection System is particularly valuable and effective
deterrent when screening the general public for metallic items, such as
guns or knives.
- Innovative design features include advanced signal processing,
Highly sensitive receiver antenna, a variety of archway geometries and
extremely sturdy construction.
|
|
| |
|
| |
Some metal detectors use BFO (Beat Frequent Oscillation). This technology contains two coils of wire. The two coils are represented by two wires which is the large and the small. The large coil can be found in the search coil of the detector while the small coil is found on the System Control Pack. The coils are connected to an oscillator which produces pulses of current. The pulse passes through the coils in order to generate radio waves.
Metal detectors using PI (Pulse Induction) technology often makes use of a single coil or even a series of coils that works as a receiver and the transmitter. The short bursts of electricity are allowed to pass through a coil or wire which causes magnetism. The magnetic field will reverse its polarity if the bursts of electrical current are stopped.
VLF (Very Low Frequency) is a metal detector having two search coils. The two coils are the “transmitter coil” which rapidly transmits electricity and the other coil known as the “receiver coil”. The activity of this coil is implied in its name already. It is responsible for receiving frequencies that bounce back from the object that the coil detects. This type of detector is best for identifying different types of metals.
|
|
|
|
|
 |
 |
| | |
Copyright ©2008 Kwick Soft Solutions Pvt. Ltd. |
|
 |
|
|
|
